Platinum
Orifice Type
- Various distributors with up to 36 outlets available for accurate and efficient pulp distribution
- Primary or secondary duty
- Long lasting, high abrasion resistant polyurethane protected working surfaces
- Accurate distribution to all outlets through replaceable orifices, constant head and adjustable feed outlet
- Modliar routing of rigid off-take piping.
Multotec Rubber Loading Points are used to conveyor transfer points in place of conveyor idlers. These innovative Multotec Rubber Loading Points comprise low friction impact bars secured to a mild steel frame
Multoslip is ideal for the lining of surface where “hanging up” is a problem and low friction qualities are needed
- Bunkers and silos
- Transport and storage bins
- Screen underpans
- Fines chutes
- Filter press chutes
- Transfer points on conveyor systems
- Dump Trucks
- Magnetite bunkers Fixing Methods Rubber backed – Sheets can be effectively glued in place using cold vulcanising adhesive where mechanical fastening systems cannot be used Sheets – Various mechanical fastening systems can be used and the utmost care is taken during installation to achieve best results
Ideal for use on multislope screens, the Polypunch panel is designed for screens where high impact and high sliding is present The Polypunch panel consists of a laser cut perforated-plate screening surface made from a range of wear resistant steels for abrasive applications, including VRN500 and Bennox to 304 stainless steel and 3CR12 for corrosive environments with cast polyurethane borders. The rigid and strong nature of the steel makes it possible to increase the amount of open area consequently increasing capacity
Designed to ensure even solids and liquid distribution by:
Outlets symmetrical to inlet
Outlet designed to reduce vena contractor effect
Total are of the outlets equal to the area of the inlet to maintain internal velocities
Computational fluid dynamics have been used to optimise the distributor design
Wide range of apertures available for various applications
Heavy duty internal frame to absorb impact and provide support
The patented Saddle Top is manufactured from polyurethane and fits onto a flat bar runner that is in turn fastened, via cleats, to the cross members of the vibrating screen.
Multotec screen support frames are custom made to suit the machine and the application. They are available for a wide range of vibrating screens and can be either of huck bolted or welded construction or a combination design
Application: * Industrial water * Sewage * Waste water treatment * Seawater (Aquaculture) * Pool water * Aquarium and zoo * Pond and fountain * Mining * Chemical industry
