Polypunch Screen Panels

Ideal for use on multislope screens with high impact and sliding abrasion

Ideal for use on multislope screens, the Polypunch panel is designed for screens where high impact and high sliding is present

The Polypunch panel consists of a laser cut perforated-plate screening surface made from a range of wear resistant steels for abrasive applications, including VRN500 and Bennox to 304 stainless steel and 3CR12 for corrosive environments with cast polyurethane borders. The rigid and strong nature of the steel makes it possible to increase the amount of open area consequently increasing capacity.

The low friction of the steel plate allows material to flow more easily down the screen increasing efficiencies and reducing wear. A flat screen-surface deck facilitates even distribution of material across the full width of the screen, eliminating the concentration of material down the valleys.

Much smaller than conventional, large punched plates, the Polypunch panel are safe and easy to handle. In addition, in the case of localised wear, only the worn section needs to be replaced – reducing running costs.

The Polypunch can easily be used in combination with other panels. For example, the Polypunch would be installed where the initial sliding abrasion and impact occurs, with modular polyurethane panels being used for the balance of the screening surface.

To suit the specified screen requirements, Polypunch panels come in standard
•305x305mm   •305x610mm   •305x705mm