Ceramic Pulley Lagging

Ceramic pulley lagging from Multotec provides significant advantages over other pulley lagging systems and, in many instances, advantages over other manufacturers of pulley lagging. When used with drive pulleys, for example, our ceramic pulley lagging improves traction and, when used on non-drive pulleys, provides a low friction surface.

This is made possible because, for the drive pulleys, the studded tiles’ high co-efficient of friction reduces belt slippage between the ceramic-lined drive pulley surface and the conveyor belt surface. On the other hand, for non-drive pulleys, the smooth or polished surface provided by hard ceramics mean less resistance and minimal friction, contributing to reduced wear.

These qualities, and others, are found in Multotec’s specialised ceramic pulley lagging solution, Multolag™ Pulley Lagging. Multolag™ is designed as a direct bonded, wear resistant cover, that is maintenance-free, applied to pulley shells on both drive and non-drive pulleys. This tailored ceramic pulley lagging option from Multotec is available in 7 mm and 13 mm lagging thicknesses, ensuring you get the correct thickness for your application requirements.

Ceramic pulley lagging from Multotec reduces both downtime and operating costs!

Some features of Multotec’s ceramic pulley lagging Multolag™

  • Experience increased uptime with stud rounded edges that prevent belt undercover wear
  • Achieve enhanced processes with dewatering grooves that facilitate dirt and water dissipation
  • Maintain productivity with minimal maintenance – all that is required is hosing down your drive pulley. This method ensures there is no loss of traction.

Find out more about our Ceramic pulley lagging and Click here to contact us today!

Reasons to invest in Multotec’s ceramic pulley lagging

Significant unplanned downtime and the associated cost implications can be a result of conveyor belt spillage, insufficient water shedding, poor traction and inferior wear properties. These can all occur as a result of conveyor belt slippage, which can be prevented with ceramic pulley lagging. In addition, the potential dangers arising from conveyor belt slippage, like carcass and splice damage, can be critical, and the risk of fire increases the more slippage continues. All and any of these could  result in a failure on the plant.  

The following advantages of our Multolag™ Ceramic Pulley Lagging offering helps to prevent the above-mentioned possibilities.

  • Multolag™ ceramic pulley lagging doesn’t wear under normal operation
  • Maintain belt tracking easily due to ceramic lagging surface consistency
  • Repair localised pulley lagging damage without replacing a complete set of ceramic pulley lagging
  • Both operating costs and downtime are reduced

Read all about how Multotec’s Multolag™ Ceramic Pulley Lagging can increase safety and reduce costs here.

Multolag™ Ceramic Pulley Lagging is 1 of 4 Conveyor System Solutions from Multotec. The other 3 solutions in this range are Multotec Loading Points, MATO Conveyor Belt Fasteners and MATO Conveyor Belt Cleaners.

Read more about how Multotec is increasing uptime and safety with ceramic pulley lagging.

Achieve your mineral processing goals with ceramic pulley lagging from Multotec.  Enquire here.

 

Minimise downtime & reduce overheads by choosing the product for your conveying needs

In the News

Multotec Provides a Small-Scale Filter Press For Industrial Water Treatment

Multotec Process Equipment recognises that there is a market for smaller scale or pilot scale filter presses, especially in the industrial waste water treatment industry.