MATO makes its mark

 Clip fastener leader MATO makes its mark in belt-cleaners

Well-known for its mechanical conveyor belt fastening systems, Multotec company MATO Products is now also leading the charge in innovative belt cleaning systems.

                                                   Courtesy: International Mining

Carsten Dietz Multotec General Sales Manager

 

MATO Products has long been a well-known name in clip fasteners for conveyor belts, especially in the underground coal sector. The company operates one of only three high production MATO machines in the world, and significantly the only one outside of Germany. In 2016, after over 30 years of operation, the unit was overhauled in an intense six month refurbishment. It was upgraded from 180 tonne to 360 tonne capacity, speeding up production and ensuring ongoing cost-effectiveness and reliability of supply for customers.

The company’s line of belt cleaning equipment has, for some time now, been gathering momentum. Its demand has extended well beyond the coal sector into other materials handling and mineral processing applications, even in diamond mining. According to Benjamin Sibanda, Managing Director of MATO Products, over-feeds at transfer points often lead to material build-up on the inside of a belt. “As mines and other industrial facilities raise their environmental standards, they want to avoid problems like duff heaps under conveyors, which can cause pollution,” he says.

Plate Clamping

The MATO MCP3-S polyurethane primary belt cleaner is designed as an aggressive head pulley cleaner, which is also friendly to the conveyor belt’s surface.

The MATO MCP3-S primary cleaner, installed at the head pulley, is designed to be an aggressive head pulley cleaner, yet friendly to the conveyor belt surface and suitable for use with mechanical fasteners. It offers a high level of cleaning due to its blade profile, and the spring tensioning system ensures the blade is in constant contact with the belt for the life of the blade while achieving up-to a maximum of 75 % cleaning.

“The secondary MATO MUS2 belt cleaner is one of our latest design belt cleaners and offers an M-TRAK slide on cushion and blade for easy installation and maintenance,” Sibanda says. 

The unique M-TRAK is designed to eliminate lengthy maintenance downtime and ensures blade alignment is 100 % true across the entire conveyor belt width. Blade replacement is very simple, with the design of the slide-on and slide-off principle eliminating the need for special tools or training when maintenance is performed.

The mato MUS2 belt cleaner offers the new M-TRAK slide-on cushion and blade for easy installation and maintenance.

The MATO MUS2 belt cleaner offers the new M-TRAK slide-on cushion and blade for easy installation and maintenance.

“The unique design of our MUS2 cushion is based on the principle of a parallelogram, whereby the cushion also stays true to the conveyor belts surface ensuring the angle of attack is maintained,” Sibanda points out. “This cleaner’s primary duty is to remove fines and duff, to almost zero carry-back.”

Blades on the cleaners come in a range of materials suited to different applications, including polyurethane and tungsten.

While the application in South Africa was initially mainly underground, equipment variations for surface have now been developed and introduced to market. The plant tail-end cleaner is based on the same concept but is mounted on channels rather than on stringer pipes.

“This product includes innovative blade stoppers,” Sibanda explains. “When the blade is worn to a certain level, the mounted flat plate does not touch the belt, providing better protection.”

Leveraging its technical expertise and experience in the market, MATO Products has also engineered closer integration between its fastener clips and the belt cleaners.

“For instance, we have added a profile to the clip which optimises the life of both the clip and the tungsten tip on our secondary belt cleaner,” Sibanda says. “The skiving process embeds the clip slightly into the belt ensuring the mechanical splice is on the same surface as the conveyor belt. This minimises the impact on the tungsten tip as well as lowering noise levels. Longer life of both means less downtime for the customer and greater reliability.”

Benjamin Sibanda

Benjamin Sibanda, MATO Products managing director, says that the application in South Africa was initially for mainly underground applications. Equipment variations for surface applications have now been developed and introduced to market.

Sibanda highlights that all the offerings in MATO Product’s conveyor belt systems range helps to improve the lifespan of equipment at loading points. The energy of ore transfer is absorbed, and wear resistance is increased by MultoLag ceramic products.

 

Latest News

  • World Conference Sampling and Blending 2019

    The 9th World Conference of Sampling and Blending (WCSB9) was held from 6 – 9 May 2019 in Beijing, with a record attendance of 450 delegates! READ MORE

  • Shaping The Youth of Ga-Masemola Through Career Expo

    Multotec SED team took part in the 7th annual career expo at Masemola Senior Secondary School. READ MORE

  • Multotec Trommel Screen for Tronox’s Band se Baai Site

    Multotec replaced a trommel at Tronox’s Namakwa Sands mine at its Brand se Baai site on the West Coast.  READ MORE