Pusher Centrifuge

Multotec supplies the Siebtechnik Pusher centrifuge that reliably and efficiently separates solids and liquids in numerous applications for the chemical, pharmaceutical and food industries.

Pusher centrifuges are characterised by long retention times, low solids loss in the filtrate, low crystal breakage and abrasion, intensive solids wash as well as minimal wear in abrasive and corrosive applications.

Multotec supplies the Pusher centrifuge in 13 sizes with drum diameters ranging from 250 mm to 1 200 mm depending on the process and production rates, and can be designed with one, two or three stage rotating parts based on the application and filtration rate.

Need more info on our Siebtechnik Pusher centrifuge? Send us an enquiry here today!

Features of the Pusher centrifuge:

  • Suited for very fine solids’ separation
  • Slow solids transport speed
  • Thick, dense filter cake (internal filtration)
  • No mechanical stress from transport elements, patented filling system
  • Direct spray of the washing medium onto the cake
  • Low transport speed, wedge wire screen in the direction of transportation
  • Wear resistant materials of construction
  • Patented filling system

Contact Multotec here for a wear-resistant Pusher centrifuge designed to optimise a wide range of dewatering applications

Expertly designed for long-lasting performance

The Pusher centrifuge belongs to a group of continuously working filtration centrifuges. The solids are retained as a cake on the wedge wire basket and transported by an oscillating step-by-step movement of the inner basket axially in the direction of the solids discharge. With the pusher centrifuge, the transport speed of the solids on the wedge wire basket is slower than with a screen scroll centrifuge.

This results in a longer retention time of the material allowing increased wash efficiency and lower discharge moistures. The size of the separated solid particles is preferably greater than 80 μm. The thick, dense filter cake ensures a good yield of even very fine solids.

Both factors, long retention time and dense filter cake, allow additional dewatering of solids with high fines content coming from other types of filters, e.g. filter press or belt filters.

Regional Availability

This is available to African market only.

Multotec increases the rate of solid/liquid separation, lowering your overall cost per ton

In the News

Reaping the Rewards in Russia: Multotec at the XII CIS Congress of Mineral Processing Engineers

Multotec presents at the XII CIS Congress of Mineral Processing Engineers in Moscow on our achievements in the iron ore industry.

 

Speak to a Multotec consultant today about how we can manufacture
a performance-enhancing process solution for you!