Loading Points
Multotec’s rubber conveyor belt loading points control the flow of material and reduce bouncing , minimising ore spillage.
These conveyor system parts are low friction impact bars secured to a mild steel frame and used at conveyor transfer points in the place of conveyor idlers. As there are no moving parts or spring mechanisms, loading point maintenance requirements are greatly reduced.
The low friction impact bar is constructed of rubber, which has been specifically compounded with a 10 mm thick Multoslip low friction polyethylene top cover. This helps it achieve its high energy absorption.
These loading points are designed so the conveyor can travel 15 to 20 mm above the loading point bed. This reduces contact, which minimises heat build-up helping to prolong the life of the conveyor.
Our Loading Points:
-
Provide increased belt life by absorbing the energy of ore transfer
-
Ensure low friction between conveyor and impact bars, mimimising wear on conveyor belt underside
-
Have low friction bars tailored for both above- and below-ground applications
Get in touch with Multotec today to see how we can optimise your plant performance.Enquire now
The reduced friction advantage:
The low friction impact bar is constructed of rubber, which has been specifically compounded with a10 mm thick Multoslip low friction polyethylene top cover. This helps it achieve its high energy absorption.
These loading points are designed so the conveyor can travel 15 to 20 mm above the loading point bed. This reduces contact, which minimises heat build-up helping to prolong the life of the conveyor.
Multotec's rubber loading points consists of collapsible sides and low friction impact bars secured to a mild steel frame. They are used at conveyor transfer points in place of idlers and controls the ore.
Above and below ground friction bar composition:
Low Friction bars for above ground conveyor belts
The standard Multotec low friction bar system uses standard materials and a T-bolt attachment secured in an aluminium insert. A tapered feed end is supplied, with both ends tapered for bi-directional conveyors.
Low Friction bars for below ground conveyor belts
Multotec’s low friction bars for underground applications comprise black anti-static Multoslip top cover, a fire retardant rubber compound and a loose clamp attachment system where a curved T-bolt fits into a groove in the underside of the bar,
Choose a process partner who will work to lower your cost per ton.
Some benefits:
- Available in standard lengths of 1 300 mm
- The mild steel frame is custom-made to suit the steel conveyor structure or stringer section
- The frame has removable sides for ease of installation and replacement of the low friction bars
- Shorter lengths can be manufactured for specific application requirements
Important information:
- Loading points longer than 1 300 mm require special engineering to accommodate impact idlers between the low friction bars. These lift the conveyor belt off the low friction bars when the conveyor operates without material
- It is not advisable for bars to be longer than 1 300 mm as too much heat build-up can occur, which could damage the conveyor or the Multoslip cover.
Interested in other Conveyor System Solutions?
Need a quote on Loading Points?
International mining houses such as Glencore Xstrata, Anglo Coal, BHP Billiton and Rio Tinto use Multotec equipment to reduce running costs and optimise plant performance.