High capacity cyclones are manufactured with a mild steel shell that is either lined with natural rubber (HC range) or ceramic tiles (HA range) according to your application requirements.
Maximum separation efficiency, low running costs and innovative designs and technologyare at the heart of Multotec’s cyclone range.
Multotec’s HC range of cyclones are manufactured with a mild steel shell lined with natural rubber.
All wetted surfaces are lined with 15 mm or 25 mm thick, replaceable rubber liners, which have a longer life than compared to conventional liners. This greatly reduces operating and maintenance costs.
Compression-moulded rubber, which has been extensively researched and is a development of rubber technology, is also available.
All major HC cyclone housings are designed with weep holes to alert plant operators when a liner needs replacing.
Advantages of weep holes:
Multotec’s HA range of cyclones are manufactured with a mild steel shell lined with ceramic tiles. The ceramic tile design prevents lining failure and maximises the lifecycle of the cyclone.
Engineered tiles provide the smoothest internal surface and maximum wear life. Each tile is specifically designed for, and allocated a place in, the cyclone for maximum strength and abrasion resistance.
Joints are designed to maximise separation efficiency.
All wetted joints are sealed with epoxy to avoid gaskets protruding into the cyclone body. Any possible areas of turbulence are minimised and a more efficient separation with less misplaced material is achieved.
The HA range of cyclones reflects Multotec’s expertise in both cyclone design and ceramic wear lining design.